The list of vehicles supported by Diamond expands with the addition of the new Milds Hybrid 2020 from the FCA group , which are now supported in OBD Full. The latest generation Marelli 11GF engine control units can be programmed directly from the vehicle’s diagnostic socket. Thanks to the new protocol on Diamond, it is possible to read and write the entire contents of Flash and EEPROM memories without removing the ECU from the vehicle . Furthermore, version 2.29.0.0 also allows you to recalibrate the engine maps contained in the control unit’s Flash memory. This new solution also offers the possibility of completely restoring a damaged ECU by transferring its contents to a working ECU.
Some of the supported vehicles include:
- Fiat Panda Mild Hybrid 1.0L FireFly 70PS
- Fiat 500 Mild Hybrid 1.0L FireFly 70PS
- Launch Ypsilon Mild Hybrid 1.0L FireFly 70PS
_________________________________________________________
Furthermore, a new exclusive solution has been released on Diamond for the Bootloader mode , which allows you to program the Delphi DCM6.2V engine control units installed on VAG group cars. This protocol allows to read and write the entire contents of the Flash memory ( virtualized EEPROM ) and to recalibrate the real maps of the control unit. In case of writing an incorrect Mod File , it is possible to use this solution to carry out a complete recovery of the damaged ECU by transferring its contents to a working ECU.
Some of the supported vehicles include:
- Audi A1 1.4L TDI 90PS
- Audi A3 1.6L TDI 110PS
- Audi Q5 2.0L TDI 150PS
- Seat Ateca 2.0L TDI 187PS
- Seat Ibiza 1.4L TDI 90PS
- Seat Leon 1.6L TDI 110PS
- Skoda Fabia 1.4L TDI 90PS
- Skoda Octavia 1.6L TDI 115PS
- Skoda Karoq 1.6L TDI 115PS
- VW Golf VII 1.6L TDI 110PS
- VW Polo V 1.4L TDI 90PS
- VW T – Roc 1.6L TDI 115PS
_________________________________________________________
Furthermore , new solutions have been released for programming in Bench mode the Bosch MEDC17 2021 engine control units protected by the anti- tuning system . The latest software version 2.29.0.0 adds the following models to the list of supported ECUs: ME17.2.42 (2021), MED17.9.9 (2021), MED17.8.32 (2021), MED17.1.27 (2021), MED17.9.3 ( 2021) . These solutions make it possible to improve vehicle performance without applying a patch or opening the engine control unit for programming. Bench mode allows reading and writing of the entire contents of Flash and EEPROM memories.
Here are some of the supported vehicles:
- BMW S1000RR 2022
- VW Nivus 2022
- Honda Civic FL5 Type -R 2022
- VW T-Cross 2022
_________________________________________________________
Protocols released:
- FCA Marelli 11GF TC277 Reading / Writing / Checksum Internal Flash; Reading/ Writing Internal EEPROM; Full Backup / Clone
- VAG Delphi DCM6.2V SPC5674 Read/Write/ Checksum Internal Flash, Full Read/Full Write Clone/ Restore
- PSA EVPT VCU3000 TC234L Read/Write/Calculate Read/Write/ Checksum Internal Flash, Read/Write External EEPROM, Full Read/Full Write
- BMW Motorrad Bosch ME17.2.42 TC1793 Read/Write/ Checksum Internal Flash, Read/Write Internal EEPROM, Full Read/Full Write Clone/ Restore
- Jaguar / Land Rover Bosch MED17.9.9 TC1793S Read/Write/ Checksum Internal Flash, Read/Write Internal EEPROM, Full Read/Full Write Clone/ Restore
- Jaguar / Land Rover Bosch MED17.8.32 TC1793 Read/Write/ Checksum Internal Flash, Read/Write Internal EEPROM, Full Read/Full Write Clone/ Restore
- VAG Bosch MED17.1.27 TC1793S Read/Write/ Checksum Internal Flash, Read/Write Internal EEPROM, Full Read/Full Write Clone/ Restore
- Honda Bosch MED17.9.3 TC1793 Read/Write/ Checksum Internal Flash, Read/Write Internal EEPROM, Full Read/Full Write Clone/ Restore
Average reading time: ~ 2 minutes and 6 seconds
Average writing time: ~1 minute
_________________________________________________________
Also added bug fixes
Bug fixes include:
- Added CRC support on JLR 6HP26
- Added CRC support on a new ME7.9.10 type
- Added CRC support on a new type of MED17.1.1
- Added CRC support on Suzuki EDC16C34
- Added CRC support on a new MM10JA type
- Added CRC support on a new type of EMS2208
- Added CRC support on a new type of EMS3180
- Added CRC support on a new type of MG1CA811
- Fixed write errors on VAG EDC16 in OBD
- Fixed OBD data corrupted error on VAG MEDC17
_________________________________________________________
Software improvements
- SW Diamond opening times optimized
- Added support for Continental EMS2212 installed on Ford vehicles in boot mode
- Improved the password checking procedure in OBD mode for SID209 Ranger.